|
|
 |
|
Machined / Fabricated end Fittings
At our machining unit we manufacture a wide
variety of end fitting such as banjo,
unions, threaded, sheet metal fittings etc,
which are used by as part of the final
assembly. However, these components are also
supplied in loose condition to our customers
where required.
|
|
|
|
|
Steel Pipe With Flanges
These assemblies find wide application in
the automotive/refrigeration industry and
also in the aviation/naval industry as
a medium for conveying fuels/oils/air from
one port to another.
the end fittings which might be forged are
precision machined as per the Job
requirement and are leak proof joined to
pipes which have the geometry / dimensions
required by the customers.
|
|
 |
|
|
|
|
 |
|
Copper Coated Steel Pipe Assemblies
Mainly applicable to hydraulic brake
applications in the automobiles industry and
widely used in the refrigeration industry,
these pipes are assembled with end fitting
as per the geometry required by the
customers.
|
|
|
|
|
| |
Hydraulic Brake Hoses
These hose assemblies have regular
application in the 4 wheelers, 3
Wheelers and also 2 wheelers industries
where brake fluid of mineral and non-mineral
oil is applicable.
The hose assemblies having internal
diameters of 3.4 mm and 4.8 mm and
burst strength of upto 800Kgf/ cm2
are assembled under strict quality
supervision and meets international
specifications of SAE and JIS.
|
 |
|
|
|
|
 |
|
Rubber Hoses and PVC Hose Assemblies
The hoses are manufactured compatible for
use with oil, air and similar applications
to international and customer specifications
and are assembled with end fittings as per
the Customers drawing/ Requirements.
However, the fittings can be supplied in
running length.
Range: internal Diameters from ¼" upto
|"
Outside Diameters dependent on construction
and pressure rating requirements.
|
|
|
|
|
| |
Wire / PVC / Rayon / Cotton Braided
Rubber Hose Assemblies
The rubber hoses are manufactured from
nitrile / chloroprene synthetic rubbers and
are braded as per the requirements and end
use. For higher pressure applications the
hose can also be internally reinforced hose
can be supplied in running lengths or
assembled with end fittings as per
requirement.
Range: internal Diameters from ¼" upto
|"
Outside Diameters depended on construction
and pressure rating requirements. |
 |
|
|
|
|
|